| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Thickness of top sides and back http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=1842 |
Page 1 of 1 |
| Author: | bob J [ Sat Apr 30, 2005 3:46 am ] |
| Post subject: | |
What are the general thicknes' and sides for 00 thru Small Jumbo(assuming same thickness for all sizes) for: Very Hard-ie Macassar, Bloodwood etc Medium-Rosewoods softer-Mahoganys |
|
| Author: | Mario [ Sat Apr 30, 2005 4:42 am ] |
| Post subject: | |
Yes. |
|
| Author: | WalterK [ Sat Apr 30, 2005 1:57 pm ] |
| Post subject: | |
Check the archives for this topic...and answers. I'm still working on my first guitar, therefore I can't consider myself an expert. I sanded the spruce top to .110 The EIR back was sanded to .095 and sides....085" I'm sure every wood has an ideal thickness. Good luck Bob  |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|